What's new
By:
TurboTransAm.com

Register today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Upper Radiator Hose

Amazing that NONE of the stores I have gone to could get the correct one. Even the local Advance/carquest. I'm betting that they are not using the letter E in the partnumber
 
According to the USPS tracking it showed up this morning. Let me know if there were any issues. Should fit perfect.
 
Anybody got current heater hose part numbers..i just ordered gates 19359..anybody got a good source for the other 11835?
 
I just did a heater core and hoses not long ago. I used the gates 19359 and B88353 that I got at Autozone.
 
fbody4me said:
I just did a heater core and hoses not long ago. I used the gates 19359 and B88353 that I got at Autozone.
Click to expand...

That was news to me (B88353) ... had a look at the picture Autozone have of the hose and looks like it should fit even if different from the original hose ... any pictures of it installed on yours?
 
Also bought an extra one (like everything for the TTA,lol). It does have another part number on it but the b88353 is the Autozone number.
 

Attachments

  • 20161030_201836.jpg
    20161030_201836.jpg
    374.4 KB · Views: 28
BTW, Don't pay any attention to the zip tied plug wires. Just one more thing I needed to change on that car.
 
And installed
 

Attachments

  • PICT0049.JPG
    PICT0049.JPG
    807.8 KB · Views: 36
  • PICT0020.JPG
    PICT0020.JPG
    361 KB · Views: 37
  • PICT0024.JPG
    PICT0024.JPG
    785.4 KB · Views: 38
Wow! How do you keep your engine bay so clean??? It looks like fine china. Is that braided ground strap OEM or did you put that on aftermarket?
 
gplmaster said:
Wow! How do you keep your engine bay so clean??? It looks like fine china. Is that braided ground strap OEM or did you put that on aftermarket?
Click to expand...

Thanks, that was after I had the complete engine bay repainted and pictures where taken when installing the freshly built engine and I powder coated and painted parts etc.

The braided ground strap is a new one I had made as my original one was pretty much trash when I took the engine out.
 
Years late on this thread, but I have a question. I'm going with flexible stainless steel radiator hoses and wondered if anyone can suggest what lengths to go with on both the upper and lower hoses? They can be cut down, so that's not a problem. Just want to keep the cost down, so looking for the closest lengths.
 
I can measure the length of both when I have time as I got a couple of sets of new hoses sitting around. If someone beats me too it is fine ;)
 
89indyta said:
Years late on this thread, but I have a question. I'm going with flexible stainless steel radiator hoses and wondered if anyone can suggest what lengths to go with on both the upper and lower hoses? They can be cut down, so that's not a problem. Just want to keep the cost down, so looking for the closest lengths.
Click to expand...

sorry took a while to get my hoses out, however here’s the centreline length of them both .... note it’s as close I could measure so I would add an inch or two and see if you like to shorten them slightly or not once you trial fit them.

Upper hose: approx 31”
Lower hose: approx 24”

post up some pictures once done and the lengths you ended up with
 
Jan Larsson said:
sorry took a while to get my hoses out, however here’s the centreline length of them both .... note it’s as close I could measure so I would add an inch or two and see if you like to shorten them slightly or not once you trial fit them.

Upper hose: approx 31”
Lower hose: approx 24”

post up some pictures once done and the lengths you ended up with
Click to expand...

As always, thanks Jan!
 
You must log in or register to reply here.
Back
Top