What's new
TurboTransAm.com

Register today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Underside Pic

Coltsfan1

Well-Known Member
Ok sitting in garage and was looking at her undercarriage. For those of you with a lift....show some pics. Especially you mcvicker.1469052006915-926149173.jpg
 
Picture under #425:)
IMG_1400_zpsxbdvel3w.jpg
 
#1515 has a 50,xxx mile underside. Only thing ever done cleaning wise was power spray with water. Took these when I got my new intermediate pipe.

 
Wow, very nice!

Lift not yet installed here.
... and even when it is, oil will drip on camera lens and ruin photo :( and camera.
 
Fbody......nice pics. And I see you have a bendpack. Have you ever greased the zerks on that lift. I can't seem to get my zerks to take grease. Like they are metric or something......
 
Hi Chad. Yes I have a Bendpak HD9, actually two of them. I also had the same problem with mine. I tried to grease them with one gun and it just oozed out around the zerk. That gun had three jaws then I tried another gun that had four jaws and it worked. They are metric (6mm I think) and I am almost positive if you go to a parts store and get 6mm replacements you will be fine. For some reason Bendpak zerks are a little small.
20160723_175211.jpg

Back when I had room to work,lol
IMG_0280.JPG
 
That does look nice! Was that a cat back kit from Magnaflow? Looks like you have put a TON of work into you car.
 
Back
Top