Thoughts on setup?

[Azvforce]

Bought this car a few years ago. Fiinally worked out the bugs on this show car to get it faster and fun to drive. 17k original on it. Mods as follows

Comp 62/62 BB/billet center
Nick Micale 3" DP
No cat, Hooker catback
4" intake and big KN
60lb Delphi inj
MS3
Holley IGN smart coils
CRUZ crank trigger setup
Aero 340, hotwire kit
PTC 2800 conv
Have a basic boost controller but have not turned it up past 16psi as of yet.
Whats next and is 25psi doable at the track on 110?

 

[jarredsoon]

You should get a scan master or knock sensor next. Especially before you up the boost so you can monitor for knock.
That’s what I would do.

 

[Azvforce]

Of course, 110 octane at the track. Street tune is 10psi on pump.

 

[Azvforce]

Knock sensor is on the car, ms3 not setup to read knock right now. With low boost on pump gas and 110 on higher, not that concerned.

 

[robert lee]

25 psi is no problem but don't get caught up in numbers, if you really want to wake it up get a 6466 DBB... but if there are any weak spots in your set-up this turbo will expose them in short order..
In other words if it runs say mid to hight 10's in the 1/4 ask yourself how many times to you want to do it with a mostly stock eng and driveline ( won't be many)

If you don't wish to get that deep in it keep your current set-up and add Alky and new valve springs, regardless you need new V springs

 

[Azvforce]

Noted, thanks. I'll look into springs and alky