scanmaster

[smiley]

anyone want to post up some install / tips to hooking up a scanmaster?

where'd you hook up to 12v at?
what ground did you use?

 

[Jan Larsson]

Some install pictures from when I did mine
http://www.tta1078.com/scanmaster/

I got +12v from the fuse box, theres a couple of empty slots with +12V ignition key on. Measure where there's some fuses missing and you will find it. Ground I hooked up to the screw close to the fuses (holding on of the metal brackets in place), basicly anywhere metal under the dash with a screw will work fine.

 

[72firebird]

Some install pictures from when I did mine
http://www.tta1078.com/scanmaster/

I got +12v from the fuse box, theres a couple of empty slots with +12V ignition key on. Measure where there's some fuses missing and you will find it. Ground I hooked up to the screw close to the fuses (holding on of the metal brackets in place), basicly anywhere metal under the dash with a screw will work fine.

yup that's what I used but if you look on the backside of the fuse box there are other ports where you can hook a wire up and then when the fuse box is bolted back in you won't see it. I also used the mounting screw for the fuse box for the ground.

here's some pictures from my install, but I forgot to get picws of where I hooked up all the wires at. http://www.turbobuick.com/forums/turbo-trans-am-tech/205691-scanmaster-gauge-install.html

 

[Quiky One]

I used the same as they did ^^^^^^^^ and it has worked great. I mounted it to the right of the apillar.