Roller Cam

[fast400]

Has anyone here ever used this setup with stock heads/block?...
FULL THROTTLE SPEED - Revolution X Roller Cam Kit Morel Lifter - Kit Configuration Page
I'm looking at the 206/210 lift version, but have the block and heads out being machined....need the correct pushrod length.

 

[jarredsoon]

I think you have to measure push rod length after the heads are fastened to the block since you are machining the heads.

 

[WS6]

You always have to measure for pushrods when you alter the valvetrain...no exceptions.

My buddy Kevin runs a full throttle roller and it's the 210/215(I think?) he has gone 10.88

 

[1970gsx]

I run the 210/215 in my GN and have gone 10.66 @ 128. I also have ported Champion iron heads.

 

[jarredsoon]

what stall are you guys running with the 210/215?

 

[1970gsx]

what stall are you guys running with the 210/215?

I have a Pats 10 inch, 3400 stall lock-up.

 

[tta299]

10.97 stock short block smiles 3770lbs