What's new
TurboTransAm.com

Register today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Need Help Identifying Missing Part That Attaches to Bottom of Front Bumper Cover

Turbobill80

Active Member
I'm missing a black flexible piece about 32 inches long that is attached to bottom of the front bumper cover with 6 bolts. It is probably used to direct air to the radiator ducting. I have not been able to find this piece in the parts book. I have seen the part on another TTA and 2 GTAs but I couldn't get a good picture because of the camera angle. Any help is appreciated.
 
I'm missing a black flexible piece about 32 inches long that is attached to bottom of the front bumper cover with 6 bolts. It is probably used to direct air to the radiator ducting. I have not been able to find this piece in the parts book. I have seen the part on another TTA and 2 GTAs but I couldn't get a good picture because of the camera angle. Any help is appreciated.
 
Thanks for responding. The part you provided looks like the air dam that fits behind the radiator between the two side air dams. looking at frt bumper.jpg The part I'm looking for is black and bolts to 6 holes on the underside of the bumper cover. This part lays flat on the front bumper cover. What it does under the car I don't know. There are attachment points under the car between the bumper cover and the radiator that it could mate to. The lowest part of the picture shows the six bolt holes and the round smudges around them. Your
TTA should have this part installed.
 
Back
Top