What's new
By:
TurboTransAm.com

Register today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Electric Cutout

TTA976

TTA976

Silver Member
Welcome to DMH Performance!

I am going to order an electric cutout at the end of this week. I think I found a winner. Looks like top of the line parts.

  • ever crawl under your car again to remove the cap from your cutout​
  • Maintainence free design!​
  • CNC Machined 6061-T6 aircraft grade aluminum body​
  • .375 diamiter 316 Stainless Steel Shaft​
  • Torrington Needle Bearings for years of trouble free service​
  • High torque gear motor​
  • Plug and play 16GA. Belden Wiring Harness​
  • Small black rocker switch is only .75" X .50"​
  • Proven Design with over 4 years of real world testing​
  • 4 year replacement warranty!​
 
I have one. I gotta tell ya that my boost sure goes up about three# when it's wide open. Just sayin so as you don't over boost. Might be due to my larger intercooler also. They sure sound good though!
 
I'm using a QTP 3" cutout...been in for 3 years now no problems...my car pic's up 3-4 psi with it open :thumbup:

http://www.summitracing.com/parts/QTP-QTEC30/

Uncork your engine's performance with Quick Time exhaust cutouts.

With Quick Time electric cutouts, you can have the best of both worlds--they're quiet for the street, and wide open for the strip. These electrically controlled exhaust valves bolt to standard cutouts, and can be opened and closed from inside the car with the flip of a switch. Using the convenient interior-mounted switch, you can go from stealth quiet to wide-open power. You control the volume, and you control the flow. Quick Time exhaust cutouts fit any car or truck, from old-school musclecars to high-tech imports.

Quick Time electric exhaust cutouts also feature:

* CNC 6061 aircraft aluminum bodies
* Stainless steel butterfly plate
* Stainless steel shaft
* 6061 aircraft aluminum motor plate
* High-torque DC gear-driven motor
* Gears made from high-temp steel for long life
* Custom-illuminated toggle switch
* Mini weathertight connectors for superior sealing
* Socket head cap screws for proper fastening
 

Attachments

  • qtp-qtec30.jpg
    qtp-qtec30.jpg
    14 KB · Views: 5
I run the DMH, I don't see much of a boost spike,but it's a little bit.

It's more of a fun factor for people that ride in the car. It's officially called the "GO" button. It sure whailes like a banshee under acceleration!
 
Call DMH and mention this site. You may get a deal on one.
Dave is a great guy to deal with.
 
You must log in or register to reply here.
Back
Top