What's new
By:
TurboTransAm.com

Register today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Wtb - 3 Inch Downpipe, Te44 Turbo

That's what I have on my TTA. Robert is correct about aftermarket fitiment. ATR actually had a TTA that they tested their products on. I can tell you this ATR 3in down is the best but like Robert mentioned Good Luck finding one and no mine is not for sale.
 
what is so difficult about installing? just too tight of an area? Do the headers have to be removed to get it in?
 
I installed Nick Micale down pipe,yes it was I tight fit .I had to remove the cross over exhaust pipe and had to jack the car up pretty high.Then I had to beat it some so it would pass the frame rail.It wasn’t easy .(beat it with a rubber mallet) , but at the end perfect fit.
 
Again ATR had a test car they fitted and tested everything they sold. I believe the Micale downpipe was made by someone he knows but as far as fit they didn't have a vehicle they specifacally tested parts on…no banging required
 
TURBOGTA said:
Again ATR had a test car they fitted and tested everything they sold. I believe the Micale downpipe was made by someone he knows but as far as fit they didn't have a vehicle they specifacally tested parts on…no banging required
Click to expand...
Actuality he did have a vehicle to test fited .I don’t know about the ATR pipes but Nicks pipe is a true 3 inch down pipe, and there is only about an 1/8 of an inch between the pipe and the frame rail . No rubbing or interference at all it’s a great piece.
 
You must log in or register to reply here.
Back
Top