Jason Zola
Member
Can anyone tell me what size and backspacing for Weld Draglites works on a TTA?
Thank, Jason
Thank, Jason
TurboTransAm.com
Register today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Weld Draglites
- Thread starter Jason Zola
- Start date
TT/Ameasap
Well-Known Member
Stock TTA?
Jason Zola
Member
No it highly modified. I ha e dyno sheets from when it was built and it was putting out 600 hp. Thanks
TT/Ameasap
Well-Known Member
Nice.
I fit the biggest wheel/tire combo I could on my TTA
I run 10''x15'' drag lites with 6.5 BS
I run a .250 spacer and stock size rear. I also run adjustable tubular lowers for more clearance.
Tires are 295/65/15 DR's
I fit the biggest wheel/tire combo I could on my TTA
I run 10''x15'' drag lites with 6.5 BS
I run a .250 spacer and stock size rear. I also run adjustable tubular lowers for more clearance.
Tires are 295/65/15 DR's
Last edited:
Jason Zola
Member
Nice ride! Thank you for the info. Is that scoop on the front to direct air flow through the radiator?
TT/Ameasap
Well-Known Member
No. It is a front mount IC. I have since taken it off.
If you want more airflow to the rad and running a stock location IC, drop the front black plastic piece that bolts up to the bottom of the front bumper. Insert 1/2'' spacers and zip tie the other end to direct the flow.
If you want more airflow to the rad and running a stock location IC, drop the front black plastic piece that bolts up to the bottom of the front bumper. Insert 1/2'' spacers and zip tie the other end to direct the flow.
