TurboTransAm.com
Register today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Wanted to complete my project
- Thread starter GNTTA
- Start date
1. Shifter handle; best bet would be ebay ... always a number of pretty nice leather handles on there, here's one:
1982 83 84 85 86 87 88 89 90 91 92 1993-2002 PONTIAC FIREBIRD GEAR SHIFTER KNOB | eBay
2. ECM; ebay good source however on turbobuick.com there's usually a guy selling good tested unit, that's where I got my spare one from.
3. A/C lines; this one is a bit harder to find, post over on turbobuick.com and or contact grumpy (Dan) over there as I'm sure he got it.
4. If just the end links with the bushings you can get these at your local parts store like Napa, Autzone, O'Reilys ... just bring your old one or the length you need and they will sort you out.
5. Autoparts store will have a aftermarket replacement as the GM one been discontinued however your GM parts dealer can get the OEMs from VPI still ... think they are $20 still.
Hope this helps,
Jan
1982 83 84 85 86 87 88 89 90 91 92 1993-2002 PONTIAC FIREBIRD GEAR SHIFTER KNOB | eBay
2. ECM; ebay good source however on turbobuick.com there's usually a guy selling good tested unit, that's where I got my spare one from.
3. A/C lines; this one is a bit harder to find, post over on turbobuick.com and or contact grumpy (Dan) over there as I'm sure he got it.
4. If just the end links with the bushings you can get these at your local parts store like Napa, Autzone, O'Reilys ... just bring your old one or the length you need and they will sort you out.
5. Autoparts store will have a aftermarket replacement as the GM one been discontinued however your GM parts dealer can get the OEMs from VPI still ... think they are $20 still.
Hope this helps,
Jan
