TurboTransAm.com
Register today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
FX Sticker For Brake Master Cylinder
- Thread starter TTA984
- Start date
No repro's and never seen a GM one for sale ... I had this one done years ago but only got the 1 spare for mine ... and now he's not doing them anymore.
Anyway what I like to do is a large sheet with all suspension stickers (springs, swaybar, shocks etc.) another sheet with all the engine bay stickers etc all marked up what they are for and where they go.
Would take some time to work things out and get it done however only concern I have is the very (and I mean very) limited interest and even selling 20 of them would be a struggle ...
Oh got the anti theft sticker (3 line TTA version) in it's way so should have that one when I'm back home next week so will let you know how that one came out ....
Then I might get started on the larger project as I have all details and know exactly what each bar code reads etc.
So something like this with 1 of each sticker needed for the TTA ... Inline tube Exclusive Detail Tags
If it's one or more sheets in total depends on what will fit on each sheet ... but maybe one sheet for suspension, another for engine bay ??
Anyway what I like to do is a large sheet with all suspension stickers (springs, swaybar, shocks etc.) another sheet with all the engine bay stickers etc all marked up what they are for and where they go.
Would take some time to work things out and get it done however only concern I have is the very (and I mean very) limited interest and even selling 20 of them would be a struggle ...
Oh got the anti theft sticker (3 line TTA version) in it's way so should have that one when I'm back home next week so will let you know how that one came out ....
Then I might get started on the larger project as I have all details and know exactly what each bar code reads etc.
So something like this with 1 of each sticker needed for the TTA ... Inline tube Exclusive Detail Tags
If it's one or more sheets in total depends on what will fit on each sheet ... but maybe one sheet for suspension, another for engine bay ??
Last edited:
bossbird ta
Well-Known Member
my car use to have one of those, then i noticed a few years ago that its now missing. i'd love to find/ get another one.......
Got that one done already, however paper quality is difficult and I did mine on gloss photopaper as it looks similar and holds up fine.
When I'm back home next week I'll post up the pdf for you all and you can print on your paper of choice then cut and punch the hole along with the releif cuts.
Note you have to make sure you have the rubber cap back there as it holds this one in place.
Now off for open top cruising to Power Big Meet starting in a couple of hours time here in Sweden !
8289ta
Silver Member
What are you driving over there?
Here you go
Just get it printed then cut ... scan of my original one attached as well as the too scale print quality PDF ... this is not a sticker rather a gloss paper one ... I did mine on just regular gloss photo paper and looks fine.Centre hole is punched then the lines are cut to help install.
