Register today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
You got a few options ... inlinetube ... classictube ...
Those hardlines are the same as on many TA's and Camaro's
I beleive it's for the 5.0 TPI but not 100% sure ... at least they are not TTA specific. However they need to run on the driver side and the exit in the engine compartment at a 45 degree (or so angle) as theres others that have a 90 degree bend on them (up front in the engine compartmement where the rubber hose attach).
So Inlinetube got them for sure however they are not listed for our cars ... best would be if you could get a photo of one but I think they only make them to order ...
So best bet is a TPI car where the lines do run on the driver side from the fuel filter.
I've found a few(local) places that reproduce lines by calling around and asking parts stores. I usually bring them the old line and they just use it as a template to reproduce it.
10 years ago I had a tranny cooler line split on my TTA. (not sure why, it only had 13k miles on it at the time) I asked about the line on the old TTA e-mail list (from Russ Salerno's site) and got in contract with someone who bought up most of the NOS TTA parts from PAS. This person was able to send me a NOS tranny cooler line. I have since lost his contact info. Anyone know who this person is???
hmmmm, I have kept receipts of pretty much everything I've bought for the car. I'll have to see If I have one for the tranny cooler line that says who I bought it from?
We had the transcooler lines, the hard fule lines (runs to the fuelrail), the powersteering cooler line all reproduced by classictube.com so they are avalible in eihter stainless or OEM material.
Thanks guys!
It's a bit of a pain over here in Germany. I may just buy the Mastercool flare tool and make my own.
Inline didn't even seem to want to help. I'll try classic tube and the dealer next.