Noticing my driver/front is hanging just a bit causing a slight pull...I know they are PBR's but when I search suppliers I am getting all different part numbers on the calipers. Thanks for any direction.
TurboTransAm.com
Register today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Front Caliper part # for rebuild kit
- Thread starter Firechaser
- Start date
tom robison
Active Member
I am in the same boat as you, hope someone can help us out. thanks tom
I got my kits from Autozone or Kragen, just ask for the kit for a trans am with performance front brakes and they will have it in their system. It's a PBR kit they will sell you.
Might be a good idea to get a replacement caliper instead, I rebuilt my front left 2 times second time it lasted for a number of years then started to leek suddenly ... got a rebuilt one from ebay and swapped them out and works fine (so far).
Might be a good idea to get a replacement caliper instead, I rebuilt my front left 2 times second time it lasted for a number of years then started to leek suddenly ... got a rebuilt one from ebay and swapped them out and works fine (so far).
tom robison
Active Member
thanks
Thanks jan! I am going to give the rebuild a whirl first...see what happens.
