crank but wont start

[justaTA]

just had the motor and trans rebuilt and have put 120 miles on so far. today driving home on the highway it just cut off going up the off ramp. it will crank but will not start.

it has blown a fuse... FP/INJ2... i dont know what EXACTLY what this fuse runs but it blows everytime i turn the key on.

i have check the following items. fuelpump system..hot wire kit and relay and pump. crank sensor . all sensors and relays are plugged in.

like i said it just shut off.no warning no nothing.

if anyone has ANY ideas i would be greatful for any and all help.

thanks JustaTA

 

[tta297]

According to the TTA Turbo Manual supplement, Fuse F/P-INJ2 protects the Computer Controlled Coil Ignition (CCCI) module.

 

[justaTA]

whee i got it fixed after blowing 12 fuses.....

it was the #6 wire connector on the bottom of the coil pack digging into the pins for the plug in.

thanks for your help tta297!